The implication is that it’s your own blood, but I like the planning/forethought. I think you’ll be going places. Probably at a run.
The implication is that it’s your own blood, but I like the planning/forethought. I think you’ll be going places. Probably at a run.
Feel the hate. Let it flow through you.
Oh, I didn’t mean to come off as dissing Prusa in general. I ponied up for an XL and it’s night-and-day better than any previous printer I’ve owned.
If this was during an auto level, it’s my humble opinion that this is a manufacturer’s defect in the machine that caused the damage. There should be proper coding to ensure that any increase in sensor pressure by (delta p) halt that machine and that there should be a pressure offset in the sensor such that a loss of signal or anomalous zero reading or lack of reading is done prior to levelling to ensure that a sensor failure has not occurred. My XL freaks out if a fan isn’t spinning at the right speed, so they clearly know that a nominal operational check before the print starts is proper engineering design.
Of course you won’t get anywhere. Unfortunately, a lot of 3D print failures really are user error so I suspect that’s their default response and it takes them a good deal of proof to push them of that mark.
Indeed, I’m not sure even testing is sufficient. My family recently got it (my wife and I visiting my parents), but thought nothing of it for a week. My father had a sore throat, my mother had watery eyes and some nasal congestion. My father masked indoors (because I don’t want a regular cold either) and chalked my mother’s symptoms to seasonal allergies (the cars were covered with Pine pollen all week). Then, on the drive home, my wife felt off. 10 hours in the car together. She slept in the guest room that night and, just for grins, tested for Covid the next morning. She was positive. We called and had my parent’s test - both positive. I tested negative so I packed my things and rented a hotel room for the week and worked there alone. I tested every other day and was never positive, but I cancelled all my client meetings.
I still never “got it” but…is it really feasible I didn’t have some low level? This is my second trip in a car for multiple hours with someone who tested positive the next day. Granted, I’m about 4 vaccines in (2xOG, 1 updated, 1 XBB variant), but so is my wife. I have to think that I had some sub-clinical level of viral load, or at least below the antigen test threshold, but I’m thankful I escaped symptoms.
Yeah, right. I wish I still had that much hair.
Not to defend them or minimize the corporate stupidity, but it sounded like there were less than 100k people affected out of tens of millions (100m?) accounts. I get that it was a big deal for those affected, but a 0.1% outage doesn’t seem “major”.
deleted by creator
Still cheaper than inkjets
The description of an unexpected/(impossible) orientation for an on road obstacle works as an excuse, right up to the point where you realize that the software should, explicitly, not run into anything at all. That’s got to be, like, the first law of (robotic) vehicle piloting.
It was just lucky that it happened twice as, otherwise, Alphabet likely would have shrugged it off as some unimportant, random event.
I would prefer they brought back the actual shipping part. Not this $169/yr for “best effort 3-10 days depending on our mood” they want me to pay for.
When mammals encounter an invasive pathogen, they increase their temperature to assist with the response to eliminate the danger, often requiring only 2-3C above their steady state average. Maybe we aren’t actually causing climate change and Earth is just fighting off the human infection.
XL feels like using cheat codes.
On the flip side, global banking processes something like 5+ orders of magnitude more transactions than ETH, so even at the low end it’s 1000x more efficient than the most well known POS coin.
If you print with incompatible filaments (materials which don’t bond/adhere) you can get cheap, nearly perfect breakaway supports. I’ve done some rocket parts on my PrusaXL and it’s certifiably magic.
I have own a rift and Q1, 2, and 3 (plus some older, but polished, Cardboard products) but have NOT had a VP demo. The jump from fresnel to pancake lenses - for productivity purposes - is substantial and I expect the VP’s moderately higher resolution to be enough to make the headset actually productive (Q3 is close but still resolution handicapped). I expect the tight integration with OSX to be useful and, if I were (a) on OSX (b) didn’t already work on an 8K monitor and © was a digital nomad or had no dedicated office/room in which to work, I could see a use case for them. Having attempted to work in i(Pad)OS professionally as a remote platform, the standalone capabilities might be useful for a blogger or journalist but is utterly unsuitable for professional work, even less so without a dedicated keyboard and mouse/advanced multitouch track pad. Again, I’ve not used the VP hand-sensing for advance selection* but my expectation is that it is still in its infancy, even with (and perhaos hindered by) eye focus selection.
My hope is that $3500/pop will allow more research, more fine tuning, and advancing to vision limited resolution (Apple is still a factor of 4 short in pixel count, and a factor of 6+ short of my desktop monitor) for future headsets.
* multi-functional, 3D manipulation of, say, finite element model components or full building/industrial models in a program like Revit or multi-assembly models in Blender or Fusion360, where you have 4+ key modifiers plus 3 buttons and two scroll wheels for fine manipulation and hundreds of quick-key commands)
I’m pretty sure that middle bit is like a springform pan. The handle is not solid - you squeeze it to make it sit in the waffle maker but when you remove it, it opens a bit to release. I have no room for this in my kitchen but am intensely intrigued. I might buy a new house so I can get a bigger kitchen and have a place for this.
That puts a smile on my face.
I’d never realized how convenient/natural a joystick is for adjusting your side mirrors. I’m not even sure my wife has the reach to both press a touchscreen in the center console and have her head in driving position to adjust the mirrors with real time feedback. Even I’d hate to have to tweak a mirror while driving with a touchscreen.