You can already run Linux apps using Termux and Termux-X11, and I’d say the performance would be better than this demo, because this is running in a virtual machine and uses it’s own kernel, whereas with Termux you’re running your apps directly on top of the Android Linux kernel. Also, you don’t have the overhead of running ChromeOS on top of Android.
Because MIUI deviates from stock Android so much that it often causes unexpected behaviour and bugs. So it’s easier for developers to just say they don’t support it, instead of putting up with negative reviews and complaints.
This is a general tech community, mostly centered around news and end-user technology discussions, so it’s very unlikely you’ll get an answer here. Might want to try asking on Reddit or some dedicated Datto/Connectwise forum.
Samsung midrangers like the A15 / M15 / A25 etc have both the jack as well as an sdcard slot. There’s also the Motorola G34 and the G84. And finally, there’s also a flagship - the ASUS ROG Phone 8 Pro. And a whole bunch of Chinese phones which I won’t bother mentioning.
Considering that predicting the next word from context is the one thing LLMs are really good at, I just don’t understand how none of these developments have found their way into predictive keyboards.
The problem is that LLMs require a considerable amount of computing power to run, unlike the simple markov chain predictions that keyboards use. You could use a cloud-based service like ChatGPT or something, but most people wouldn’t want their keyboards to send all their keystrokes to a remote server… and even if they didn’t know or care, the response time wouldn’t be good enough for real-time predictions.
Now smartphone SoC makers like Qualcomm have started adding NPUs (neural processing units) with their latest chips (such as the SD8 Gen 3, featured in the most recent flagship phones), but it’s going to take a while before devices with NPUs become commonplace, and it’ll take a while for developers to start making/updating apps that can make use of it.
But yeah the good news is that it is coming, it’s only a matter of “when” - I suspect it won’t be long before the likes of SwiftKey start to take advantage of this.
That 240W is only for SuperVOOC. PD however goes only upto 65W. Plus, being that big and single-port only makes this thing completely pointless for everyone except VOOC users.
Prompt: >!Pikachu sleeping on a bed next to the window, in a cozy room, with early morning sunlight streaming thru the window. [Copilot]!<
The answers here are only partially correct. If you want to use your device internationally, there are four things or categories you need to consider:
Carrier locked devices are exactly that, these are the ones sold by your carrier and subsidised, they usually mention that you can’t use them with other carriers. Eg the SM-S928U of the S24 works only on AT&T. If you have one of these, you may be able to buy an unlock code online to unlock your phone. Depending on your model, you might also need to flash compatible firmware or unlock additional bands from the service menu, if you want to be able to actually use it with your destination carrier.
Region-specific devices generally have limited cellular bands, meant for usage in that country. Eg although the SM-S928U1 variant of the S24 is factory unlocked (unlike the SM-S928U), it may not carry all the bands required for operation outside the US. If you’re unsure about compatibility, use this website to check the bands for your target country/carrier. Generally though, if you travel a lot, it’s recommend to buy the international / global variant of a phone. As an alternative, if you have a US variant Samsung, you could use the service menu to enable all bands. Though regardless of the variant, it’s always a good idea to check the band compatibility before you purchase the device/travel.
Carrier whitelisting is a recent annoying thing which carriers have started doing for some technologies such as 5G, VoLTE, VoWiFi etc. Some of these features may or may not be critical for you, for eg, if the destination carrier no longer offer 2G/3G services, that means you must be able to get VoLTE in order to make calls. And VoWiFi is needed if you’re in an area with poor reception, but have WiFi access. Finally, 5G would be a bonus thing but most carriers allow only whitelisted models to connect to their 5G services. Samsung normally should work in general, but given how many variants Samsung makes, there’s no guarantee that your specific variant would be able to use some/all of these services. So you’ll need to check with your target carrier in advance to see which of their services your phone would be able to support.
Finally, some countries may have regulatory requirements which may legally prevent shops/carriers from selling you a SIM card, if your phone isn’t in their database. For instance, in Japan, it’s technically illegal to operate a device without a “giteki” mark - and if your phone doesn’t have this, operators may refuse to sell you a card. In this case however, you should be fine if you order a compatible SIM/eSIM online before arrival (eg from Sakura Mobile).
It’s easiest to just register a domain name and use Couldflare Tunnels. No need to worry about dynamic DNS, port forwarding etc. Plus, you have the security advantages of DDoS protection and firewall (WAF). Finally, you get portability - you can change your ISP, router or even move your entire lab into the cloud if you wanted to, and you won’t need to change a single thing.
I have a lab set up on my mini PC that I often take to work with me, and it works the same regardless of whether it’s going thru my work’s restricted proxy or the NAT at home. Zero config required on the network side.
The bypassnro command still works though. Installed 23H2 in a VM yesterday and it worked fine.
This shouldn’t even be a question lol. Even if you aren’t worried about theft, encryption has a nice bonus: you don’t have to worry about secure erasing your drives when you want to get rid of them. I mean, sure it’s not that big of a deal to wipe a drive, but sometimes you’re unable to do so - for instance, the drive could fail and you may not be able to do the wipe. So you end up getting rid of the drive as-is, but an opportunist could get a hold of that drive and attempt to repair it and recover your data. Or maybe the drive fails, but it’s still under warranty and you want to RMA it - with encryption on, you don’t have to worry about some random accessing your data.
GSIs are the way to go these days for anything that’s not a Pixel. I’m not sure if there’s a fully-degoogled GSI out there though, but you can check the list here: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Or here: https://xdaforums.com/f/treble-enabled-device-development-a-ab-roms.7260/
And once you found a GSI you like, install using the instructions here: https://github.com/phhusson/treble_experimentations/wiki/Samsung
But it’s best to check XDA forums as well for any device-specific quirks.
AIO Launcher - not for everyone, but I prefer function over form. :)
No, you’re right. There’s no organisation options. It’s pretty barebones overall, and doesn’t look great on large foldables either. Guess there’s no reason to switch from my current launcher.
Passwords are used in more places than just browsers though. If there wasn’t any need for a dedicated app, why did they bother making one for Windows?
But personally, I dislike Bitwarden as well. I prefer KeepassXC instead, as it works fully offline and I don’t need to depend on a cloud-based provider (or spin up a server). The best part about KeepassXC is that it supports auto-typing credentials, so you don’t need to copy-paste - and it works across a multitude of apps, such as remote desktop / terminal sessions.
all devices
Lies, there’s no Linux app yet. As usual, Proton Inc continues to treat Linux users as third-class citizens, all whilst claiming they care about privacy and security.
Edit: They don’t even have a macOS app yet lol.
It was big among the netsec/sysadmin crowd too, it was the first place you’d hear of 0-days in the wild, or whether a popular site/service was down.
These are great!
Now I feel like watching a classic 50s epic, Ben-Hur perhaps?
In the footnotes they mention GPT-3.5. Their argument for not testing 4 was because it was paid, and so most users would be using 3.5 - which is already factually incorrect now because the new GPT-4o (which they don’t even mention) is now free. Finally, they didn’t mention GPT-4 Turbo either, which is even better at coding compared to 4.