Surely not Maslow or MB, both have so many exception’s and so little real science behind them they just aren’t really useful things for the majority of people.
Surely not Maslow or MB, both have so many exception’s and so little real science behind them they just aren’t really useful things for the majority of people.
Please keep in mind that you need to seal that print before you use it with food. Because of the layers, there’s are a ton of places for dirt and bacteria to hide that are impossible to clean. Additionally, depending on what kind of nozzle you used, heavy metals can end up in your print which you don’t want to then leech into your coffee. General advice is to just not use 3d prints first good, but if you really want to you should coat them in a food safe epoxy before using.
The reality is they may not know exactly what was obtained, but they do know it wasn’t anything they don’t collect (like DOB, SSN, etc listed in the message). Instead of looking at this purely as a CYA message, instead looking at it as informing you as soon as they had any idea your information may have been impacted instead of waiting weeks/months to inform you. Don’t let perfect be the enemy of good.
A lot of these depend on the model and where it’s installed (geographically and within the house). In many areas of the US, there is a drain in the floor near all water heaters as a matter of code, you can drain condensate directly to that (and unlike gas appliances, the condensate is clean and does not need treated to go in household drains). I honestly think the noise concern is hugely overblown and used as an excuse for people that don’t like change. Sure it exists, but if your water heater is in the basement or garage like the majority are at least in my areas of the US, you’ll never notice it. I also look at the cooling air as a benefit for at least half the year, I can close all the vents in our basement for the whole spring/summer and it’s super comfortable. In the winter it’s a tad chilly, but not uncomfortable. Drying the air is also great for our basement, it’s literally a dehumidifier in what’s usually a pretty damp location for many people. Ours (a rheem unit) has a flimsy plastic air filter you vaccuum off once a year as well so not really a huge deal. I think most are like this.
I agree that folks should do their homework and understand what they are getting. Heat pump water heaters are great, but are overpriced at the moment. Even with electric company rebates and a tax credit it cost more than a decent gas replacement would for us. It’s likely to only pay off because we have solar and so don’t really pay for electricity for a large chunk of the year. But I expect costs to come down over the next 5-10 years as these become the go to for most electric installs (and with fewer new gas hookups in new and renovated buildings that’s like to be most installs). Once these hit that $700-$1000 price point there’s really no good reason most people shouldn’t default to installing one.
They almost always have two high wattage resistive elements installed like a traditional electric water heater which require the 220v/30a circuit. The compressor runs on 220v but sips almost no real current while running.
YMMV of course, and will highly depend on how many people are in your house and how you use hot water, but a 50 gallon heat pump water heater easily supplies a dishwasher and two long showers with 1/3 of a tank of available water left in our house (and I take pretty hot showers that are not always as short as they should be). Sure, it takes an hour or two to fully recover but we aren’t ever looking to use much more hot water at one time. If you have a household of four, it may be a bit more of a problem, but then you can easily schedule other hot water uses to happen “off peak” like a dishwasher.
Idk, I DIY swapped out old gas water heater for an electric heat pump water heater heater and it was super straight forward. If you have the plumbing and electrical skills to add a circuit and move your hookups (since on most gas water heaters they are on top and most heat pump water heaters they are on the sides top and bottom), you probably have the skills to safely disconnect and cap off the old gas line. Just be sure to use pipe dope that is rated for gas, and check with soapy water once you pressurize the line again for leaks.
Ours is also Rosie, it just seemed so obvious
I would recommend prowlarr instead of jackett for indexer management, and pihole as at least an additional blocking service but in reality it’s really all you need for use at home. I’d also strongly encourage use of a VPN on your *arr download services. I use a separate box to run Plex and then have my *arrs all running on their own VM inside if it to provide separation and allow be to more easily segregate the network traffic (as someone that doesn’t really know docker that well it “just works” for me. Also probably worth looking at how to store your media on an external target, it’s easy to quickly accumulate 10s of TBs of media and trying to store that all on the server locally is asking for trouble. Better to set everything up on a NAS to start.
I’ve not been formally diagnosed, but I’m 100% sure I have had ADHD. I talked with my parents about it a few weeks ago and they basically just said “yeah you probably have always had it, but we never argued your doctor about it”. The idea that I’m in my thirties and only recently really identified why I struggle with things is so infuriating. Worse yet is the fact that there were things that could have helped me succeed and be more comfortable in school is just the worst. I manage fine at this point with various strategies to be successful so it’s not really worth it to me to talk to my doctor and argue that I’ve always been like this, but man is it just hard sometimes.
Asking broadly like this is akin to asking for a guide on how to cook, it’s generally too broad for there to be a single guide. You first need to figure out what your goals are (you state one already, you’d like it to be externally accessible), determine what services you want to host, and then start looking at how to do so.
The advice I’d give is to start with a solid base, you’ll need something to self host on and it really shouldn’t be the PC you use for other things. Get it setup to run a virtualization OS such as proxmox and use that as your starting point. Then do a lot of reading. I spend probably three to four times as much time reading about the service I’m planning to deploy compared to actually doing the work to deploy it. Lastly, plan. You should have a solid plan in the beginning of how you want your service to work (what will be external vice internal only, how will you setup the networking stack to do that, are you going to have a domain, and will you use subdomains or folders to divide services, what does your IP space look like, will you host your own firewall to make the networking more controlled or fight with your ISPs router, do you want to use docker, kubernetes, or maybe full VMs for each service, do you want/need a UI to manage things from or are you comfortable with CLI, etc). These answers will lead you to guides for various services as well as service specific forums where help is more focused.
I use protonmail with their family plan, it’s not terribly priced when you consider it comes with calendar, vpn, and drive storage as well. The biggest annoyance is probably that you have to use their mobile apps due to the encryption and they are not the greatest, but it does encrypt everything which I find outweighs the forced use of just their app.
It replaces the ad revenue the channel would otherwise have gotten from your view, at a higher rate than an ad impression.
Curious about the ears you have on your 8 port POE switch; I’d love to rack mount mine and get it off my “other stuff” shelf. Are they from UI? Or did you repurpose some from something else?
So you never apply patches or updates, that seems like an odd thing to be proud of but different strokes for different folks I guess.
Backblaze B2. Any software that is S3 compatible can use B2 as the target and it’s reasonably priced for the service. I backup all the PCs and services to a Synology NAS and then backup that to B2 (everything except my Plex media, that would be pricy and it’s easy enough to re-rip from disc if needed).
This is pretty much it, Plex offers far more client apps that are full featured and they make it super easy to setup and use both as an admin and a user. Especially for things like OTA TV where they provide the guide data once it’s setup (which is why it’s a paid option). I’d move to JellyFin in a heartbeat if they’d support OTA and DVR playback on AppleTV.
I also have a decent amount of video data for Plex (not nearly 50TB, but more than I want I pay to backup). I figure if worst comes to worst I can rip DVD/BluRays again (though I’d rather not) so I only backup file storage from my NAS that my laptops and desktop backup to. It’s just not worth the cost to backup data that’s fairly easy to replace.
I also recommend B2, it’s an S3 compatible service so any backup software/scripts/plugins that work with S3 should work with Backblaze.
For me as the driver of not one of these cars, I think the driver monitoring and sheeting is perhaps one of the most important parts of these systems. I 100% want your car to scream at you for not paying attention while use the driver assist features because it’s such a common and easy thing to do (if it works 99 times without issues, human nature is to assume it will work that 100th time, so checking that email from work real quick is probably fine). When the consequences of a driver failing to post attention while using these systems is potentially other people dying in a horrific crash, your discomfort at an alert because you happen to be a perfect driver that never does other things in the car while driving doesn’t matter.